NGAC EC907-34
Electrically Conductive and Room Temperature Curable Epoxy Adhesive
To request a FREE sample of NGAC EC907-34, complete the form or email us directly at info@nextgenadhesives.com.
DESCRIPTION:
NGAC EC907-34 is a two-part, electrically conductive silver filled epoxy adhesive which can be cured at room temperature. It was designed for applications requiring excellent mechanical and electrical properties.
ADVANTAGES AND APPLICATIONS:
NGAC EC907-34 provides strong and high impact bonds which are electrically and thermally conductive. It bonds to a wide range of substrates including metals, glass and plastics. Additionally, the NGAC EC907-34 is highly resistant to chemicals. EC907-34 passes NASA outgassing and weight loss requirements.
NGAC EC907-34 features the following characteristics that enable ease of use.
PROPERTIES:
*All values reported below are typical values and are for reference use only. These values are not intended for use in developing specifications. Application testing under specific conditions should be performed to determine actual results and fitness for use.
COLOR (mixed): Silver
VISCOSITY, MIXED, cps
@25˚C, CP52, 10rpm: 27,000
MIX RATIO BY WEIGHT (R/H): 100/6
HARDNESS, Shore D: 84D
LAP SHEAR, psi: 1600
OPERATING TEMPERATURE: -60 to +125˚C
VOLUME RESISTIVITY, Ohm-cm
CURED @25˚C FOR 24h: 0.003
CURED @65˚C FOR 2h: 0.0009
CURED @110˚C FOR 1h: 0.0007
CURED @150˚C FOR 1h: 0.0005
THERMAL CONDUCTIVITY, W-m-K: 3
POT LIFE: 3 hours
NASA OUTGASSING: PASSES
CURE SCHEDULE:
Temperature of 25˚C for 24 hours
OR
Temperature of 65˚C for 2-4 hours
Note: The NGAC EC907-34 will achieve 80% cure after 8 hours at 25°C
For additional information or assistance, please call 978-436-9600.
ADDITIONAL ELECTRONIC ADHESIVE PRODUCTS
