NGAC UV-AB50
FAST Dual Cure Alignment Urethane Acrylate
To request a FREE sample of NGAC UV-AB50, complete the form or email us directly at info@nextgenadhesives.com.
DESCRIPTION:
NGAC UV‐AB50 is a non-yellowing and fast curing Urethane Acrylate. It was designed for rapid bonding of plastics and metals typically used in the manufacture of optical components. NGAC UV‐AB50 can be cured in seconds using visible/uv light. It also contains a secondary thermal cure mechanism for applications with shadowed areas.
ADVANTAGES AND APPLICATIONS:
NGAC UV‐AB50 bonds extremely well to a broad range of substrates including most plastics and metals. NGAC UV‐AB50 exhibits excellent surface wetting. It provides high chemical and temperature resistance and cures with very low shrinkage.
NGAC UV-AB50 features the following characteristics that enable ease of use.
PROPERTIES:
*All values reported below are typical values and are for reference use only. These values are not intended for use in developing specifications. Application testing under specific conditions should be performed to determine actual results and fitness for use.
COLOR: Light Brown
VISCOSITY: 120,000 cps
SPECIFIC GRAVITY: 1.59
HARDNESS, Shore D: 90D
OPERATING TEMPERATURE: -50 to +150˚C
HEAT DEFLECTION TEMPERATURE: >200˚C
CURE PROFILE:
MINIMUM INTENSITY: 200 mw/cm2
SPECTRAL OUTPUT: 365-410 Nanometers
OPTIMUM WAVELENGTH: 365 AND 405 Nanometers
This product requires direct UV exposure to cure.
Uncured/Shadowed areas may be cured with heat, 60 minutes at 150˚C depending on depth of cure required.
There is variability in UV light sources. Therefore, we recommend each user evaluate UV intensity and exposure time for their given application and UV equipment.
This product is sensitive to visible light at wavelengths greater than 400 nm.
For additional information or assistance, please call 978-436-9600.